BGJHF - A-1460-66 17875 WHITE POLYURETHANE
- MSDS: BGJHF
- Manufacturer: KOPPERS CO INC
- Product Name: A-1460-66 17875 WHITE POLYURETHANE
- National Stock Number: 8010-01-054-0741
Product Identification
Product ID:A-1460-66 17875 WHITE POLYURETHANE
MSDS Date:01/01/1985
FSC:8010
NIIN:01-054-0741
Kit Part:Y
MSDS Number: BGJHF
Responsible Party
PITTSBURGH, PA 15219-1818
US
Cage: 80592
Contractor
Cage: 80592
Ingredients
ETHYL ACETATE
RTECS: KQ4900000
Fraction By Weight: 17%
CELLOSOLVE ACETATE
RTECS: FJ4375000
Fraction By Weight: 32.0%
ACGIH TLV: 100PPM
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 7.9%
OSHA PEL 200 PPM
ACGIH TLV: 200 PPM/300STEL;9394
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 6.5%
OSHA PEL 200 PPM; Z-2
ACGIH TLV: S, 50 PPM; 9394
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Effects of Overexposure:HEADACHE, NAUSEA, MODERATELY IRRITATING TO EYES
AND SKIN.
First Aid
First Aid:REMOVE VICTIMS FROM VAPORS--RESTORE BREATHING IF NECESSARY.
REMOVE FROM SKIN WITH SOAP AND WATER. FLUSH EYES WITH WATER.
Fire Fighting
Flash Point:22F TOC -6C
Lower Limits:1.0
Extinguishing Media:CARBON DIOXIDE, FOAM OR DRY CHEMICAL.
Fire Fighting Procedures:DO NOT USE WATER.
Unusual Fire/Explosion Hazard:VAPOR MAY FORM EXPLOSIVE MIXTURE BETWEEN
UPPER AND LOWER EXPLOSIVE LIMITS.
Accidental Release
Spill Release Procedures:REMOVE SOURCES OF IGNITION. APPLY SAWDUST OR
OTHER ABSORBENT MATERIAL. KEEP MATERIAL FROM SPREADING.
Handling
Handling and Storage Precautions:FLAMMABLE- STORE AWAY FROM OPEN FLAME
& HIGH HEAT.
Other Precautions:DO NOT TAKE INTERNALLY - AVOID PROLONGED CONTACT WITH
SKIN.
Exposure Controls
Respiratory Protection:FOR CONFINED AREAS, USE BUR OF MINES RESPIRATORY
DEVICE.
Ventilation:SHOULD BE ADEQUATE TO KEEP LOWER LEVEL BELOW LEL.
Protective Gloves:RUBBER
Eye Protection:SAFETY
Other Protective Equipment:RUBBER SOLES MUST BE WORN (NO STATIC
ELECTRICITY)
Supplemental Safety and Health
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:175-231 F
Vapor Density:HEAV
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:67
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, CO*2, ALDEHYDES & OTHER ORGANICS
Disposal
Waste Disposal Methods:PUT IN METAL CONTAINER & SEAL FOR DISPOSAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.